Table of Contents
Advertisement
4-4
Configuring through COM Port
If network connection is not available at your location, you can still manage the
SNMP IPv6 by using the COM port connection. Please follow the instructions below.
127(
If you are running on a non-Windows system, refer to your system's User
Manual for Telnet clients.
Step 1
Set up a workstation (Microsoft Windows 2000, 2003, 2008, XP, Vista or 7).
Step 2
Use the provided RJ45 to D89 cable to connect the SNMP IPv6's COM port
and the workstations' COM port.
Step 3
Make sure both of the DIP switches of the SNMP IPv6 are set to the OFF
position (normal mode).
Step 4
For workstations running Windows 2000, 2003, 2008 or XP, go to Start
Programs
nal.
127(
Microsoft has removed HyperTerminal from Windows Vista and later
versions. For workstations running these systems, you can still download a
free Telnet/ SSH client 'PuTTY' from http://www.putty.org.
Accessories
Communications and select HyperTermi-
4
6\VWHP &RQ¿JXUDWLRQV
Chapter
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the InsightPower SNMP IPv6 for UPS and is the answer not in the manual?
Questions and answers