Table of Contents
Advertisement
Chapter 5 : InsightPower UPS Web
To configure the SNMP IPv6 via the InsightPower UPS Web, please follow the steps
below:
Step 1
Make sure that your InsightPower SNMP IPv6 is connected to the LAN. Use
a CAT5 cable to connect the SNMP IPv6's network port and the network.
Step 2
Launch your Web Browser. Enter the SNMP IPv6's Host Name http:/In-
sightPower/ or IP address http://192.168.1.100/ in the address bar.
For encrypted connection, enter https://InsightPower/ or https://192.
168.1.100/.
Step 3
When connection is established, the InsightPower UPS Login page ap-
pears. Enter your account and password. (Default: admin/ password).
http://192.168.1.100/
127(
1. If you have previously changed the SNMP IPv6's Host Name or IP address,
make sure to provide the correct information accordingly.
2. If the login page is accessible, but you are unable to log in with correct
account and password, additional network configuration is needed. The
cause could be the IP subnet of the computer you are logging in to is dif-
ferent from the SNMP IPv6's. To solve this issue, please refer to Chapter 7:
Troubleshooting Q3.
3. The SNMP IPv6 will automatically log off idle connections after 30 min-
utes.
5
,QVLJKW3RZHU 836 :HE
Chapter
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the InsightPower SNMP IPv6 for UPS and is the answer not in the manual?
Questions and answers