LifeSpan APEX Owner's Manual page 8

STEP 1:
STEP 2:
1. Open the carton and remove all
2. Note: For safety reasons, do NOT cut
1. Lift the Left Upright Tube (A05) upwards.
Figure 1
2. Fix the Left Upright Tube (A05) to the
3. Repeat the step above to assemble the
Figure 2
4. NOTE: During assembly, support the
8
contents. Place the Main Frame (A02)
on level ground and ensure that you
have a clean work space that has
adequate space.
the Packing Belt (F) until you've
completed assembly
See Figure 1.
Base Frame (A01). Use 1 Bolt (D46) and
1 Lock Washer (D64) to secure the side,
and 1 Bolt (D50) and Lock Washer (D64)
to secure the front.
Tighten using Allen Wrench (B12).
Right Upright Tube (A06) to the Base
Frame (A01). See Figure 2.
Upright Tubes (A05 and A06) with your
hand to prevent them from falling down.
APEX