Optional Hidden Valet Switch; Personal Coded Override Reset & Total System Reset - Omega Research & Development Excalibur Gold ATV Series Comprehensive Installer Technical Manual

Supplement

Table of Contents

The Information and Programming Module is designed to be mounted on the windshield in view of the driver, and contains the Digital Status Indicator,

the Visual Deterrent LED, and the Valet Switch. Although the Valet Switch may custom-programmed with a "press code" of the customer's choosing, the

ATV

design of the EG-1800

allows the use of an optional Valet Switch which may be hidden (the optional Valet Switch part number is #22LC). Simply plug

the optional Valet Switch into the Blue 2-way port on the EG-1800

Module, cut the wire in the 5-way harness connecting the Information and Programming Module to the control module; this wire is indicated in the following

diagram.

Personal Coded Override Reset & Total System Reset

The EG-1800

ATV

has a Total System Reset feature. The installer, if needed, may quickly return all of the programmable features to the factory-set default

positions. However, the initial stage of the Total System Reset returns the Personal Coded Override to the factory default setting of 1 and 0 presses of the

Valet Switch. To perform Personal Coded Override Reset and/or a Total System Reset, follow these steps:

1) Locate the small round hole in the lower control module case. Two solder dots will be visible beneath this hole.

2) Short the two solder dots together and hold in a shorted condition (a slotted jeweler's screwdriver works well).

ATV

EG-1800

SUPPLEMENT