Table of Contents
Advertisement
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's large upper button. The system
will respond with a single siren chirp (or horn honk) to indicate that this Feature is ON. Pressing the small center button will turn this Feature OFF, with
the system's response being two siren chirps (or horn honks).
13) 30 Or 60 Second Activated Alarm Cycle: Default 60 Seconds. When an armed security system is activated, this Feature determines how long the siren
(or horn) will sound, and how long the parking and dome lights will flash.
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's small center button. The system
will respond with two siren chirps (or horn honks) to indicate that this Feature is now set for a 30 second activated alarm cycle. Pressing the large upper
button will return this Feature to a 60 second cycle, with the system's response being one siren chirp (or horn honk).
14) Lights On 30 Or 5 Seconds Upon Disarm: Default 30 Seconds. This Feature sets the length of time that the parking and dome lights stay on upon
disarming the security system. The longer time allows inspection of the area around and inside the vehicle when dark.
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's large upper button. The system
will respond with a single siren chirp (or horn honk) to indicate that this Feature is now set for a 5 second parking and dome light period. Pressing the
small center button will return this Feature to a 30 second period, with the system's response being two siren chirps (or horn honks).
15) Disarm System Upon Trunk Release: Default ON. This Feature causes the security system to automatically disarm when the small center button is
pressed and held to operate remote trunk release. If this Feature is turned OFF, the trunk release will still operate, but the system will remain armed.
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's small center button. The system
will respond with two siren chirps (or horn honks) to indicate that this Feature is OFF. Pressing the large upper button will turn this Feature ON, with the
system's response being a single siren chirp (or horn honk).
16) Doorlock Pulse Time .8 Or 3 Seconds: Default .8 Second. Some vehicle's power doorlocking systems (example: pneumatic systems) require a longer
output pulse to operate properly. This Feature allows the installer the flexibility to accommodate suchsystems without the added expense of an additional
adaptor.
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's small center button. The system
will respond with two siren chirps (or horn honks) to indicate that the doorlock output pulse is now 3 three seconds. Pressing the large upper button will
return this Feature to the .8 second pulse, with the system's response being a single siren chirp (or horn honk).
17) Double Pulse Unlock (DPU
to remotely unlock the doors and/or to disarm a factory-equipped security system.
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's large upper button. The system
will respond with one siren chirp (or horn honk) to indicate that the doorlock output pulse is now a double pulse. Pressing the small center button will
return this Feature to the single pulse, with the system's response being two siren chirps (or horn honks).
TM
): Default OFF. This is another Feature provided for the installer's benefit. Some newer vehicles require a double pulse
Page 38
Programming Features - EG-1400
ATV
& EG-1600
ATV
Advertisement
Chapters
Table of Contents
