Table of Contents
Advertisement
ATV
The EG-1200
has ten Programmable Features, easily changed through the Features Programming Mode. The Programmable Features are:
Feature #1- Last Door Arming and Automatic Rearming (Factory Setting Off).
Feature #2- Last Door Locking and Automatic Relocking (Factory Setting Off).
Feature #3- Ignition On / Off to Lock / Unlock Doors (Factory Setting On).
Feature #4- Open Door Bypass to Feature #3 (Factory Setting On).
Feature #5- 30 or 60 Second Activation Duration (Factory Setting 60).
Feature #6- Double Pulse Door Unlock (Factory Setting Off).
Feature #7- Steady Siren Or Pulsed Horn Output (Factory Setting Pulsed Horn*).
Feature #8- Horn Confirmation Honk Loud Or Soft (Factory Setting Soft).
Feature #9- Open Door Arming Alert (Factory Setting Off).
Feature #10-
Transmitter Activated Anti-Carjacking (Factory Setting Off).
* Please note that this feature is changed from the default setting at the factory for using a siren.
To access Features Programming Mode and change any of the Programmable Features:
Step #1- Turn "off" the ignition.
Step #2- Within 7 seconds of turning "off" the ignition, press the Valet Switch 5 times.
Step #3- You have just entered into the Feature Programming Mode. To confirm this, the siren will respond with a long chirp. For the next 10 seconds the
system is ready for you to select what feature code you want to access and turn on or off. The Feature Programming Mode will deactivate if a selection
is not made within 10 seconds.
Step #4- Within 10 seconds of entering the Feature Programming Mode, press the Valet Switch the number of times that equal the feature number you wish
to access. After pressing the Valet Switch multiple times the siren will chirp the same number of times to confirm what feature number you access for
programming. Example: Press 5 times and the siren will chirp 5 times.
Step #5- To turn on the feature press the large transmitter button. The siren will chirp once to confirm that the feature is turned on. To turn off the feature,
press the small center transmitter button. The siren will chirp twice to confirm the feature is turned off.
Programming Features
EG-1200
Page 30
ATV
Programming Features - EG-1200
ATV
Advertisement
Chapters
Table of Contents
