Table of Contents
Advertisement
The 30 Programmable Features and their factory-set default settings are listed below. Following this each Programmable Feature and the programming
operation is explained.
1)
Personal Coded Override: Default 1 & 0.
2)
Last Door Arming: Default OFF.
3)
Automatic Rearming: Default OFF.
4)
Starter Interrupt 90 Seconds After Ignition "Off" Or Disarming: Default OFF.
5)
Doors Lock Upon Last Door Arming: Default OFF.
6)
Doors Lock Upon Automatic Rearming: Default OFF.
7)
Doors Lock Upon Ignition "On": Default ON.
8)
Unlock #1 Upon Ignition "Off": Default ON.
9)
Unlock #2 Upon Ignition "Off": Default ON.
10)
Open Door Bypass For The Previous Three Features: Default ON.
11)
Confirmation Horn Honks (or Siren Chirps): Default ON.
12)
Confirmation Horn Honks (or Siren Chirps) While In Valet Mode: Default OFF.
13)
30 Or 60 Second Activated Alarm Cycle: Default 60 Seconds.
14)
Lights On 30 Or 5 Seconds Upon Disarm: Default 30 Seconds.
15)
Disarm System Upon Trunk Release: Default ON.
16)
Doorlock Pulse Time .8 Or 3 Seconds: Default .8 second.
17)
Double Pulse Unlock (DPU
18)
3 Or 45 Second Arming Delay: Default 3 Seconds.
19)
Pulsed Horn / Steady Siren Output: Default Pulsed Horn.
20)
Loud or Soft Confirmation Horn Honks: Default Loud.
21)
Total Closure Lock Output: Default OFF.
22)
Ignition-Activated Anti-Carjacking Protection: Default OFF.
23)
Door-Activated Anti-Carjacking Protection: Default OFF.
24)
3rd Channel Activated Anti-Carjacking: Default OFF.
25)
Open Door Warning Upon Arming: Default OFF.
26)
Current Sensing: Default OFF.
27)
Current Sensing Delay 3 Or 210 Seconds: Default 210 Seconds.
28)
Remote Start Engine Run Time 10 Or 20 Minutes: Default: 10 Minutes.
29)
Automatic Remote Engine Start: Default OFF.
30)
Gasoline Or Diesel Engine: Default Gasoline.
The following pages describe each programmable feature and the programming procedure.
EG-1800
ATV
SUPPLEMENT
TM
): Default OFF.
Page 69
Programming Features
Advertisement
Chapters
Table of Contents
