Optional Hidden Valet Switch Eg-1600; Atv - Omega Research & Development Excalibur Gold ATV Series Comprehensive Installer Technical Manual

3) Momentarily shorting the solder dots together will result in one siren burst. The Personal Coded Override is now returned to the factory-set default
position (1 and 0 presses of the Valet Switch).
4) Shorting the solder dots for several seconds will result in two siren bursts. All of the programmable features are now returned to the factory-set default
positions.
The Information and Programming Module is designed to be mounted on the windshield in view of the driver, and contains the Digital Status Indicator,
the Visual Deterrent LED, and the Valet Switch. Although the Valet Switch may custom-programmed with a "press code" of the customer's choosing, the
design of the EG-1600

ATV

allows the use of an optional Valet Switch which may be hidden (the optional Valet Switch part number is #22LC). Simply plug
the optional Valet Switch into the Blue 2-way port on the EG-1600
Module, cut the wire in the 5-way harness connecting the Information and Programming Module to the control module; this wire is indicated in the following
diagram.
Optional Hidden Valet Switch
EG-1600
Pin #5 -(Black) Valet Switch return
Pin #4 - (Black) (+) 5 Volts supply
Pin #3 - (Black) Signal Data
Pin #2 - (Black) (-) Ground
Pin #1 - (Black/White) Display Data
ATV
ATV control module. To disconnect the Valet Switch on the Information and Programming
Plug the optional
Valet Switch into
this Blue 2-way port
Page 43
Cut this wire
Optional Hidden Valet Switch - EG-1600 ATV