Omega Research & Development Excalibur Gold ATV Series Comprehensive Installer Technical Manual page 40

Supplement
Table of Contents

Advertisement

vehicle. Thirty seconds after the siren (or horn) and lights engage, or, when the ignition is turned "off" the starter interrupt circuit will activate. Once the
Anti-Carjacking is engaged, the only way to disengage it is to turn the ignition "off", then "on" again, and then press the Valet Switch within 5 seconds (or
enter the Personal Coded Override).
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's large upper button. The system
will respond with a single siren chirp (or horn honk) to indicate that this Feature is ON. Pressing the small center button will turn this Feature OFF, with
the system's response being two siren chirps (or horn honks).
23) Door-Activated Anti-Carjack Protection: Default OFF. This feature causes the Anti-Carjacking Feature described previously to be activated by the
opening of a door at any time while the ignition switch is "on". This Feature may be used alone, or inconjunction with the previous "Ignition Activated
Anti-Carjacking". If a door is opened while the ignition switch is "on", the Anti-Carjacking Feature will engage 53 seconds after the door is closed. The
Valet Switch must be pressed within 60 seconds after the door is shut to cancel the Anti-Carjacking Protection Feature.
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's large upper button. The system
will respond with a single siren chirp (or horn honk) to indicate that this Feature is ON. Pressing the small center button will turn this Feature OFF, with
the system'sresponse being two siren chirps (or horn honks).
24) 3rd Channel Activated Anti-Carjacking Protection: Default OFF. This Feature allows remote activation of the Anti-Carjacking Feature. When this
Feature is utilized, pressing the transmitter's small lower button for 3 seconds will activate the 3rd Channel Output, but if the ignition switch is "on", this
operation will also activate the Anti-Carjacking Feature, which is previously described.
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's large upper button. The system
will respond with a single siren chirp (or horn honk) to indicate that this Feature is ON. Pressing the small center button will turn this Feature OFF, with
the system'sresponse being two siren chirps (or horn honks).
25) Open Door Arming Alert: Default OFF. When this Feature is utilized, if one of the vehicle's doors is open when the system is armed by using the
transmitter, the siren will chirp (or the horn will honk) and the lights will flash 3 times instead of once upon arming the system. When a door is open upon
arming, this Feature configures the system to have the same arming confirmation as if the hood or trunk were open.
To change the system from the default setting, follow Steps 1, 2, and 3. At Step 4, press and release the transmitter's large upper button. The system
will respond with a single siren chirp (or horn honk) to indicate that this Feature is ON. Pressing the small center button will turn this Feature OFF, with
the system's response being two siren chirps (or horn honks).
Page 40
Programming Features - EG-1400
ATV
& EG-1600
ATV

Advertisement

Table of Contents
loading

Table of Contents