Table of Contents
Advertisement
5. Internal Memory
5.3. Operation parameter setting area
2.
The process alarm boundary value area is equivalent to the process alarm boundary
value configuration in I/O parameter setting window as shown in the following
figure.
Process alarm hysteresis setting area (address 43~46); Process alarm HYS
1.
If it is set out-of-range, 0 (no hysteresis) is set internally; %UXa.b.24 ~ 27 (setting
error flag) is set. The bit, 10 of setting error information area (address 60 ~ 63) is
ON.
2.
If it is within the range even in alarm reset condition during use of process alarm
function, it maintains alarm output.
REFERENCE - INTERNAL
For more information, refer to Specifications.
84
Isolated Thermocouple Input Module TC4S User's Guide
Honeywell
R200
September 2010
Advertisement
Table of Contents
