Setting By Program (Instruction) - Honeywell TC4S User Manual

Setting by program (instruction)

When the module is in RUN mode, you can directly write changes in the program
settings to the memory using the instruction (PUT/PUTP).
REFERENCE - INTERNAL
For the memory address, refer to Internal Memory.
PUT instruction
Area Setting
Operand
Sl
S1
S2
N
R200 Isolated Thermocouple Input Module TC4S User's Guide
September 2010
Description
Slot number where special
module is installed (set to the
hexadecimal)
Address in internal memory of
special module
Start number of address or a
constant; saved data will be
saved in special module.
Number of data to save:
Honeywell
4. Operations and Monitoring
4.2. Parameter Setting
Data Size
WORD
WORD
WORD
WORD
43