Table of Contents
Advertisement
5. Internal Memory
5.4. Other data monitoring setting area
5.4
Other data monitoring setting area
It describes the area to monitor flag information for setting error in case of setting
operation parameter with program and read input Rate Change for detection interval if
Rate Change alarm is used. In addition, it describes how to read the error code in case of
sensor disconnection and monitor cold junction temperature.
Setting error information output area (Address 60~63)
1.
In case the settings are out-of-range (if set by program), the bit is output with 1.
2.
Setting error is reset as long as it is re-set within normal range by reset.
3.
In case of setting error, the module LED does not change. In case the junction of
%UXa.b.24 ~ 27 is ON, it checks the area and fixes the area correctly.
BIT
0
Sensor type setting error
1
Filter value setting error
2
Averaging type setting error
3
Average value setting error
4
Min. scale range setting error
5
Max. scale range setting error
6
H.H. process alarm value setting error
7
H. process alarm value setting error
8
L. process alarm value setting error
9
L.L. process alarm value setting error
10
Process alarm hysteresis setting error
11
H. Rate Change alarm value setting error
90
Isolated Thermocouple Input Module TC4S User's Guide
Description
Honeywell
Address
1~4
6~9
10~13
14~17
19,21,23,25
20,22,24,26
27,31,35,39
28,32,36,40
29,33,37,41
30,34,38,42
39~46
48,50,52,54
R200
September 2010
Advertisement
Table of Contents
