Preparing For Measurement - Beurer BM 76 Instructions For Use Manual

System requirements for the 'beurer
HealthCoach' app
Bluetooth from 4.0, iOS from version 10.0, Android
®
from version 5.0.
List of compatible devices:

6. Preparing for Measurement

Installing/Replacing Batteries:
If the batteries are depleted and you cannot power the
blood pressure monitor on, you will need to reset the
date, time and Bluetooth
batteries. All stored measurements will still be saved.
Slide the battery compartment cover in the direction
of its arrow to remove. Insert four AA alkaline
batteries according to the polarity markings inside the
compartment. Reattach battery compartment cover.
settings after replacing the
®
Setting the hour format, date, time and
Bluetooth settings:
®
If date and time are not set, stored measurements will
TM
not have a valid timestamp associated with them.
NOTE: Press and hold the +/- Buttons to advance
values rapidly.
1. If '12h' is not flashing in the LCD Display, press and
hold the SET Button for five seconds.
2. Select an hour format (12 or 24 hour display) with the
+/- Buttons and press the SET Button to confirm.
3. The year flashes on the LCD Display. Set the year
with the +/- Buttons and press the SET Button to
confirm.
4. The month flashes on the LCD Display. Set the
month with the +/- Buttons and press the SET
Button to confirm.
5. The day flashes on the LCD Display. Set the day with
the +/- Buttons and press the SET Button to confirm.
NOTE: If the hour format is set to 24h, the day/
month display sequence is reversed.
16