Additional Information; Warranty - Lantronix xPico 200 Series User Manual

Button Signal
SW3 WAKE

Additional Information

Intellectual Property
Lantronix and xPico are registered trademarks of Lantronix, Inc. in the United States and
other countries.
Patented: http://patents.lantronix.com; additional patents pending.

Warranty

For details on the Lantronix warranty policy, please go to our Web site at
https://www.lantronix.com/support/warranty.
Disclaimer
This product has been designed to comply with the limits for a Class B digital device
pursuant to Part 15 of FCC and EN55032 Rules when properly enclosed and grounded.
These limits are designed to provide reasonable protection against radio interference in
a residential installation. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with this guide, may cause
interference to radio communications. Changes or modifications to this device not
explicitly approved by Lantronix will void the user's authority to operate this device. The
J7
Module
pin
200 module to factory defaults
Module Wake Up
Button assertion will wake up the xPico 200 module
from standby or sleep states. Requires the function
20
to be enabled on the module. See the
Series Embedded Wi-Fi Gateway User Guide
more information on low power states.
Button Function
xPico 200
for