Installing Drivers; Ethernet Drivers; Video Drivers - Xycom 1510 Manual

1510 Industrial PC Computer System Manual

Installing Drivers

This section describes how to install the drivers associated with the 1510. Information
about installing drivers for your computer is included in the Documentation and Support
Library CD shipped with your computer, or on the web at www.xycom.com.

Ethernet Drivers

If you want to use Ethernet capabilities with Windows 95, your system
If MS-DOSÒ is installed on your system, the Ethernet drivers are supplied on your hard
drive in the C:\netdrv directory, but they are not installed.
To install the MS-DOS Ethernet drivers,
1. At the C: prompt, type "cd netdrv".
2. Once the C:\netdrv path is specified, type "install".
3. Follow the on-screen instructions to complete installation.
If you install WindowsÒ on your system, Xycom provides the Ethernet drivers. They can
be found on the Ethernet Drivers disk that ships with your system, on the Support Li-
brary CD, or on the web at www.xycom.com.
If you install WindowsÒ NT 4.0 or WindowsÒ 95 on your system, be
aware that the Ethernet drivers included in those operating systems do
not work with the Ethernet controller in the 1510. You must use the
These drivers can be found on the Ethernet Drivers disk or Documenta-
tion Support Library CD that ships with your system, or on the web at

Video Drivers

Video drivers for each operating system are on the diskettes included with the documen-
tation kit. Drivers are also included on the Documentation and Support Library CD or on
the web at www.xycom.com. To install a video driver, refer to the INSTALL.TXT file
on the diskette for your operating system.
24
Note
must have BIOS revision level 1.1 or higher.
Note
drivers provided by Xycom.
www.xycom.com.