Field Bus Integration And Data Mapping - ABB Wireless Proximity Switches Planning And Installation Manuallines

Planning and
Installation Guidelines
Technical Description

3.10 Field Bus Integration and Data Mapping

Fig. 3.1: Overview of Input Module WDI100 integration into an automation system
The data sent via field bus from the WDI100 to the PLC are organized as WORD (16Bit, see picture
below). The structure is the same for every field bus used (PROFIBUS, DeviceNet).
Fig. 3.2: Example overview of WDI100 input module data structure and its integration via the
The WDI100 provides the proximity information and a data valid or status information of up to 120
communication modules WSIX via the field bus. For this set of data, 16 words are needed on the
fieldbus
36 Planning and Installation Guidelines
Configuration Software
of Automation System /
PLC
Automation System
PLC
BUS
Master
24 V
0 V
FieldBusPlug PDP21-FBP into an ABB PLC 07KT98 with a PROFIBUS-master
Engineering Package WEP100.0101
FieldBusPlug
FBP
BUS Master
Fieldbus
Termination resistor
or bus continuation
Data
Parameters
Wireless Proximity Switches / Issue: 09.2004
ABB_078F.gsd / ABB_082D.gsd
WDI100.eds
WDI100
V 6