ABB Wireless Proximity Switches Planning And Installation Manuallines page 27

Planning and
Installation Guidelines
V 6 Technical Description
Procedure Display content *)
CFG- AUTO-DETECT menue
CFG
/\ or \/
AUTO
CFG- AUTO-DETECT-SCAN for the autromatic configuration of an input module. Until at least one sensor has been
configured, NONE is displayed instead of a sensor number
CFG
OK
AUTO NONE
CFG
OK
AUTO 017
CFG-AUTO-DETECT-STORE
CFG
/\ or \/
AUTO STORE
*) All sensor information and cell-ID identifications are examples; XXX stands for blinking display
Wireless Proximity Switches / Issue: 09.2004
An input module can automatically seize all configured wireless proximity switches in
its reception range, which carry its Cell-ID.
In this way, when exchanging the input module, a very fast recognition of all the wireless proximity
switches installed in a machine by the new input module is possible, and can be stored as valid
configuration.
Operator
options
/\ or \/
12
ESC
OK
ESC
12
/\ or \/
12
ESC
/\ or \/
12
ESC
OK
Description
Change to another free sensor number
Change to CFG-MAIN menue
Change to CFG-AUTO-DETECT-SCAN
Change to CFG-AUTO-DETECT menue
Change to another received sensor number or to
CFG-AUTO-DETECT-STORE
Change to CFG-AUTO-DETECT menue
Change to another received sensor number
Change to CFG-AUTO-DETECT menue
Storage of automatically detected sensors as valid
configuration
Planning and Installation Guidelines 27