Operators; Creating A New Operator - Ingenico iCT250E User Manual

15. Operators

This function is used to register and delete operators using the termin al. Operators are registered with a unique opera-
tor ID (up to 10 digits) and name. Each operator must be registered on each terminal that they use.
It is possible to access-protect operators by activating a four-digit code. The first operator to register with his/her code
becomes the Master. The Master Operator is the only person who can create or delete registered operators. If the Mas-
ter Operator is not known, a list of registered operators can be printed out. The Master is marked with an *.

15.1 Creating a new operator

Used for registering a new operator on the terminal.
Merchant menu
1 Issuers
2 EOT
3 Operator admin
Operator admin
1 Add Op.
2 Delete Op.
3 Print ops.
Operator Id:
Operator Name:
ABC
Operator PIN:
Operator added
Swipe the Merchant Card, magnetic strip facing left.
Press numeric key 3
or scroll down to Operator admin.
Press OK to register a new operator.
Enter operator number and press OK.
Enter operator name. Use the F4 key (the key at the top right of the terminal)
to toggle to lower case.
Enter the optional four-digit PIN and press OK. If a PIN is not required, the
field may be left empty. Simply press OK.
User Guide Payment terminals | 39