Ingenico iPP350 Configuring

Pinpad

Hide thumbs Also See for iPP350:

Download this manual

One Blue Hill Plaza, Sixteenth Floor, PO Box 1546

Pearl River, NY 10965

1-800-PC-AMERICA, 1-800-722-6374

(Voice) 845-920-0800 (Fax) 845-920-0880

Configuring the iPP350 pinpad from

Serial to USB Interface

This pinpad is often pre-configured for a Serial connection. This document will provide

instructions for configuring the Ingenico iPP350 pinpad for USB connection.

1 |

P a g e

Page 1 (Voice) 845-920-0800 (Fax) 845-920-0880 Configuring the iPP350 pinpad from Serial to USB Interface This pinpad is often pre-configured for a Serial connection. This document will provide instructions for configuring the Ingenico iPP350 pinpad for USB connection. P a g e...
Page 2 Changing from Serial to USB Interface 1. After powering on the pinpad, the following screen will appear. On the keypad, press the +,#* key and the yellow key at the same time then release. 2. At the Retail Base screen, enter the numbers 2634 followed by the green Enter key.
Page 3 3. Press the F key for the Functions menu. 4. Then using the Down key, scroll to TDA and press the Enter key. P a g e...
Page 4 5. Press 0 on the keypad to select Configuration. 6. Press 0 on the keypad to select Communication. P a g e...
Page 5 7. Press 0 on the keypad to select Select Comm. Type. 8. Press 3 on the keypad to select USB<>Serial Conv. P a g e...
Page 6 8. Press the Cancel key until the pinpad prompts for a reboot. Select 1 for Yes to save and reboot. The pinpad will now reboot. 9. On the keypad, press the +,#* key and the yellow key at the same time then release.