Using A Mains Adapter - Microlife Aponorm Basis Control Instructions For Use Manual


Always remove the rechargeable batteries
if you do not intend to use the monitor for a
week or more.

The batteries canNOT be charged while
inserted in the blood pressure monitor. Recharge
the batteries in an external charger and observe
the information regarding charging, handling and
durability.

6. Using a mains adapter

You can operate this monitor using the Microlife
mains adapter (DC 6 V, 600 mA).

Only use the aponorm
ble as an original accessory appropriate for
your supply voltage. You can purchase the
mains adapter in your local pharmacy.

Ensure that neither mains adapter nor cable
are damaged.
1. Plug the adapter cable into the mains adapter
socket of the blood pressure monitor.
6
2. Plug the adapter plug into the wall socket.
When the mains adapter is connected, no battery
current is consumed. We recommend to have bat-
teries in the monitor even with mains operation,
mains adapter availa-
®
just as a back-up. They ensure that in the event of
a power failure date and time are retained and do
not have to be entered manually again.
7. Error messages
When an error occurs during a measurement, the
measurement is interrupted and an error message
displayed, e.g. «Err 3».

If you do not receive an error message, but
if the results seem unusual to you, please
check whether you observed all points of the
check list on page 7 and in the enclosed flyer
"8 golden rules of taking the blood pressure".

For more detailed help in troubleshooting the
monitor, please refer to the download section
of the www.aponorm.de product website.
11