Remove The Drive Plate - Digital Equipment VAXstation 3100 Series Upgrade Manual

To remove a Model 76 drive plate, do the following and refer to
Remove the
Figure 4–2:
Drive Plate
1. Connect the alligator clip from the wrist strap to the system
2. Disconnect the internal SCSI power and signal cables from
3. Disconnect the internal SCSI power cable from the power
4. Disconnect the internal SCSI data cable from the system
unit.
the RZ2x disk drives and the diskette drive, if present.
supply.
module.
Removing Options from a Model 76 Workstation 4–3
Removing Fixed Disk Drives