Remove The Ethernet Rom; Removing The Ethernet Rom From The Model 40 And 48 System - Digital Equipment VAXstation 3100 Series Upgrade Manual

Removing the Ethernet ROM
Remove the
Ethernet ROM
Remove the Ethernet ROM, as shown in Figure 3–9.
Figure 3–9 Removing the Ethernet ROM from the Model 40
Set the Ethernet ROM on an antistatic mat until you are ready
to install it in the VAXstation 4000 system.
3–14 Removing Options from a Model 40 and 48 Workstation
When removing the Ethernet ROM from the system
board, antistatic precaution must be adhered to.
and 48 System
Caution
MLO-010913