Table of Contents
Advertisement
OPERATION
Example of group list with switch function
List 01
Switch function 01 (channel 01)
Switch function 32 (channel 32)
NOTE: If no group lists
Group lists und channels with switch functions must be programmed under "Settings".
GROUP LISTS
12:29
Mon 25.10.2010
l
SWITCH FUNCTIONS
Living room
Lighting
Channel 002
Channel 003
Channel 127
Channel 128
l
ASSIGN SWITCH FUNCTIONS (CHANNELS) TO RECEIVERS
– Use the cursor button
– Activate the switch function with the Enter I button.
– Activate the receiver learning mode (see receiver operating instructions).
– Use the cursor button
– If required, adjust the functions and parameters of the receiver (see receiver operating instructions).
NOTE: If you press the cursor button several times
assigned to the receiver or deleted.
D - 8
or switch functions are displayed, then they have not yet been programmed!
List overview
Living room
List 02
List 03
l
l
Activate switch function (channel)
Lighting
Back (to group list): ...........................
,
Select group list
,
Select switch function (channel)
Back (to start screen)
Back (to group lists)
or
to select a switch function (channel) from the group list.
or
to assign the switch function (channel) to the receiver.
Living room
Lighting
Roller shutters UP / DOWN
l
Display group list
Living room
Activate switch function (channel): ..
Lighting
Back (to group lists): .........................
Channel 002
Channel 003
Back (to start screen): .......................
Channel 127
Select switch function: .....................Button
Channel 128
Select group list: ...............................Button ,
,
Select group list
Back (to start screen)
Cursor button
= Lighting ON
Cursor
= Lighting OFF
or
, the switch function (channel) will be alternately
Living room
Lighting
Roller shutters UP / DOWN
l
PEHA_M_450FU_HS128 (Rev02-26.07.17)
,
Advertisement
Table of Contents
