REMOTE COMMISSIONING (DECENTRAL INITIAL OPERATION)
TRANSMITTERS
All the registered transmitters can be viewed here. Saved with the actual transmitter address (address) and the relevant
index (e.g. rocker ID, (wall sensor rocker)) are also the EEP (EnOcean equipment profile), the output to be connected and
the Easyclick Plus function and mode.
If a modification is carried out, a security question will appear:
Use the
button to search a transmitter or add a new transmitter.
If more than 32 transmitters are to be configured, the following error message is displayed:
After a change, the information is transferred to the receiver using the
Click to modify the transmitter address. The following is then displayed:
D - 24
= Back to the Selection menu.
= Changes were not accepted, back to the Menu
= OK and transfer changes to the receivers
= Cancel and back
= Delete transmitter in the receiver
= Accept new address
button.
PEHA_M_450FU_HS128 (Rev02-26.07.17)