Table of Contents
Advertisement
REMOTE CONTROL FUNCTIONS
TIMERS
The timers that have already been programmed will appear in the display. You can use the cursor buttons to select them
to monitor or adjust settings. The numbering of the timers from 01 – 32 takes place automatically. Use
new timer.
Settings
Time
Timers
Channels
Menu lists
Shortcut keys
Display
2.00
l
The following settings can be programmed for each timer:
Timer 01
Timer name
Function
Switching time
Delete timer
(1) 20:00 SMT WT F S
(2) 07:00 SMT WT F S
l
D - 10
l
Programme timers
Timers
Switching on/off of all timers: ............................................
Timer 01
Create new timers: .............................................................
Confirm and back (to Settings): ..........................................
Select timer (Timer 01 - 32): ...............................................
+
Activate setting: .................................................................. l
NOTE: Timers can only be programmed after after the time has been set!
l
Set timer
TIMER NAME: Menu button
numbers/characters
Then use the Enter I button to confirm the characters you have selected. A maximum of
17 characters is permitted.
Use the
appear in the top line. Then enter the function.
FUNCTION: Use the
or inactive
"Channel" or a "User function".
Under "Channel", use the cursor buttons to set the function of the channel and timers (1)
and (2) (timer = on, off, down, up).
Under "User function", the timer functions (1) and (2) can be set with the cursor buttons
(timer = start or stop of the user function).
Save with the
activated weekdays will be displayed in the lower part of the display.
Factory setting: Timer (1) 20:00 SMTWTFS; timer (2) 07:00 SMTWTFS.
SWITCHING TIMES: Under (1) and (2) , you can use the cursor buttons to set the timer
switching times on/off. To set the days of the week, the corresponding weekdays are
displayed with the
Use
to the timer menu.
DELETE TIMER: Use this command to delete the timer. Press the Enter I button to
prompt the message: "Really delete xx timer?".
If you press Menu button
is pressed, the user will return to the menu with no changes applied.
Select menu item
,
Back to settings (Timers)
abc
is used to switch from upper/lower case and
012
. Select a character with the cursor buttons to enter a name.
button to save, and then return to the Timer menu. The name will now
,
cursor button to switch the timer function to active
. This can be used to select whether the clock should be assigned to a
button, and then return to the Timer menu. The switching times and
button, and hidden with the
to turn the switching times on/off. Use the
then the timer will be deleted. If the Menu button
+
to create a
,
+
,
button.
button to save and return
PEHA_M_450FU_HS128 (Rev02-26.07.17)
Advertisement
Table of Contents
