Radiolinktest; Factory Settings - Honeywell PEHA 450 FU-HS128 Manual

Easyclick handheld transmitter
Table of Contents

Advertisement

REMOTE COMMISSIONING (DECENTRAL INITIAL OPERATION)

RADIOLINKTEST

This radio range test is carried out in exactly the same way as in the EnOcean Service menu (see Section 3), except that
this test is carried out automatically, with no master-slave configuration required. Display during the test:
The result is displayed once the test has been completed (RLT result):

FACTORY SETTINGS

Here, operators can use the Remote Management of the receiver to reset to "Factory settings". All the modified
parameters and transmitter data are deleted accordingly.
PEHA_M_450FU_HS128 (Rev02-26.07.17)
= Back to the Selection menu
= Back to the Selection menu
= OK and transfer changes to the receivers
D - 27

Advertisement

Table of Contents
loading

Table of Contents