REMOTE CONTROL FUNCTIONS
SETTINGS
It is useful to begin with the settings during the initial operation of the handheld transmitter.
Settings
Time
Timers
Channels
Menu lists
Shortcut keys
Display
2.00
l
TIME AND DATE
Settings
Time
Timers
Channels
Menu lists
Shortcut keys
Display
2.00
l
LANGUAGE
Settings
Login
Language
Histogram
EnOcean service
Remote management
Factory settings
2.00
l
PEHA_M_450FU_HS128 (Rev02-26.07.17)
Operation
Function
Cursor buttons
Use the cursor buttons to select the relevant setting. When the lowest
, ,
,
setting is reached, the display switches to the next page. Use the Enter I
button to confirm the selection.
Enter I button
Use the left Menu button to return to the start screen.
2.00
The version number is shown in the icon display.
The following settings can be programmed:
– Time
– Timers
– Channels
– Menu lists
– Shortcut keys
l
Set time and date
Back (to Settings): ..........................................................................
Time
Confirm and back (to Settings): .....................................................
12
12: 29
Time/date setting: .........................................................................
Mon 2010.11.22
Select: ............................................................................................ ,
NOTE: The time of the handheld transmitter must be reset if the batteries are
discharged or removed! This is essential in particular to activate programmed timers.
A clock that has not been set will be displayed by the !
l
Set language
Cancel without changing: .....................................................
Language
German
Confirm and back (to Settings): ............................................
English
Select: ...................................................................................
NOTE: You can select from our standard languages of either German or English. The
"Configuration tool" PC software enables users to transfer an additional language.
– Display
– Login
– Language
–
Temperature measurement
– Histogram
– EnOcean service
– Remote management
– Factory settings
,
icon in the start screen.
, l
,
D - 9