Table of Contents
Advertisement
REMOTE MANAGEMENT
Use the "Remote Management" function to carry out any programming, to set up the initial operation and set values locally.
This means, for instance, that receivers in places that are difficult to access can be easily programmed. The following functions
are available:
• Automatic search of addresses or receivers by inputting the security key (unlock code)
• Local switching action (enables the visual discovery of the selected device)
• Easy assignment of a new transmitter
• Download of all the data contained in a receiver
• Management of all transmitters and parameters
• Upload of modified values
• Direct radio link test
• Restore factory settings
NOTE: The last 5 functions are only possible with bidirectional Easyclick receivers!
The following options are available to ensure the security of a system:
• Devices to be operated via remote management must first be unlocked with a security key (password).
• The device password consists of 8 characters/numbers (0 to 9, A to F).
• "00000000" is the factory setting of the password on delivery or when the device factory setting is restored (default code).
• "FFFFFFFF" invalid code.
• If the device is accessed, a session is opened for 30 minutes. This is then automatically closed by the receiver.
• If a receiver receives an incorrect security key, it will block all access for 30 seconds, and the remote station
(e.g. handheld transmitter) must wait during this time until a key can be sent again.
• If devices are in the factory state, they can only be accessed using the delivery status of the security key (default code)
for the first 30 minutes following the voltage recovery.
NOTE: If the handheld transmitter Settings menu is closed, access to the receiver will be automatically terminated.
Once the "Remote Management" function has been activated with the Enter I button, users will be asked for the 8-digit
password to access the system.
PEHA_M_450FU_HS128 (Rev02-26.07.17)
D - 21
Advertisement
Table of Contents
