Table of Contents
Advertisement
REMOTE COMMISSIONING (DECENTRAL INITIAL OPERATION)
This function is only possible if a bidirectional receiver is detected, otherwise this menu remains hidden. The percentage
in the progress bar indicates the percentage that has been read by the receiver. Only when 100% has been read can the
user access the menu item.
The advanced commands are based on the standard commands, and enable full, company-specific access to the PEHA
receiver.
Advanced initial operation enables users to access all the learned transmitter parameters, internal parameters and data
from the receiver.
DEVICE INFORMATION
Contains information such as device name (label). Device type designation (device) for more effective identification
device ID and firmware version (version)
Click the device name to change it. A keyboard then appears to enter the name:
PEHA_M_450FU_HS128 (Rev02-26.07.17)
= Display all the channels in the handheld transmitter
= Back to the Selection menu.
= Display all the channels in the handheld transmitter
= Back to the Selection menu.
= Back to the Selection menu.
= Changes were not accepted, back to the Menu
= Switch from upper/lower case and numbers/characters
= OK and transfer changes to the receivers
D - 23
Advertisement
Table of Contents
