Table of Contents
Advertisement
REMOTE CONTROL FUNCTIONS
CONSUMPTION DATA HISTOGRAM
The "histogram" function provides a graphic display of the consumption data of a selected channel over the past
24 hours, the past week or in a group list. The total consumption of all the receivers in the list is displayed. The handheld
transmitter retrieves the total of all the values of the receivers and displays the values graphically. The lower display area
shows the total consumption of the past 24 hours or 7 days, and the corresponding consumption costs.
NOTE: The function can only be carried out using bidirectional Easyclick receivers with the energy measurement function.
It is not possible to measure consumption with Easyclick blind and roller shutter receivers!
The following Easyclick receivers can be used:
1) Switch receiver: 451FU-EBIM o.T. , 451 FU-BEBIM , 451FU-EBIM UP o.A. , 452FU-EBIM o.T. , 454 FU-EBIM DE
2) Adapter: 4511 FU-EBIM ST , 4571 FU-EBIM ST xx.
Settings
Login
Language
Histogram
EnOcean service
Remote management
Factory settings
2.00
l
FACTORY SETTINGS
Settings
Login
Language
Histogram
EnOcean service
Remote management
Factory settings
2.00
l
PEHA_M_450FU_HS128 (Rev02-26.07.17)
Set histogram
l
Histogram
Cancel without changing: ....................................................
Costs
Confirm and back (to Settings): ...........................................
Currency
€
Factor
0.275
Enable or disable histogram: ...............................................
Setting: ................................................................................ ,
Select: .................................................................................. ,
If the histogram is activated, a message appears asking if you wish to display the cost
representation. Setting with the cursor buttons
be set to display costs. This will include the factor (€/ KWh) which is used to convert
consumption into electricity costs.
Example of cost representation:
24-hour display
Week display
Display factory setting
l
Factory setting
Back (to Settings): .......................................................................
Reset
Confirm (hold button down for approx. 5 seconds): ..................
device
(hold button down)
WARNING!! After displaying the factory setting of the handheld transmitter,
all the settings you have adjusted will be deleted! You will now have to reprogramme
the handheld transmitter!
, . The currency symbol (€, $, £) can
,
D - 17
Advertisement
Table of Contents
