Table of Contents
Advertisement
SERVICE TOOL
ENOCEAN SERVICE
Settings
Login
Language
Histogram
EnOcean service
Remote management
Factory settings
2.00
l
ENOCEAN MONITOR
The EnOcean monitor can be used to analyse the transmitter radio signal. The field strength, quality and type of the
radio signal are measured and displayed. Each transmitter has a fixed transmitter ID that can be used to clearly identify
it! If repeaters (radio amplifiers) are used, the signal they emit is also displayed.
Settings
Login
Language
Histogram
EnOcean service
Remote management
Factory settings
2.00
l
The time and date are shown in the top line, and also when the telegram was received. The transmitter ID address that
sent the telegram is displayed below this. The signal strength is displayed in the first segment bar "O" (original telegram).
The quality of the 1-level repeater is displayed in the second segment bar "R1". The quality of the 2-level repeater
is displayed in the third segment bar "R2". Two bars are considered sufficient telegram strength. If no repeaters are
available, the segment bars will be empty.
Several transmitters can be activated almost simultaneously in larger systems. This makes it difficult to analyse the radio
signal of a single transmitter. You can therefore use the
ID and to analyse this specific transmitter at various distances.
D - 18
EnOcean service
l
The EnOcean service comprises the following 3 functions:
1. EnOcean monitor
EnOcean monitor
08:15:36 26.08.2011
ID 001219F5
O
R1
R2
~
Back (to Settings): ............................
EnOcean monitor
l
EnOcean monitor
08:15:36 26.08.2013
ID 001219F5
O
R1
R2
~
Radio signal
Time + date
Transmitter (transmitter ID)
Field strength (O, R1, R2)
Radio signal: O = transmitter (original telegram) ; R1 = 1-level repeater ; R2 = 2-level repeater
Back (to Settings): ............................................
Filter transmitters (transmitter ID): .................
Monitor function stop/start: ...........................
2. Repeater
Repeater
Off
Select EnOcean service: ..................... ,
EnOcean monitor
ID
001219F5
Type RPS
Data 00
St.
20
~
Type
Transmitter (transmitter ID)
Type: RPS, 1BS, 4BS
–
Select display (see above): .........................
Select EnOcean service: ............................. ,
~
button to filter out the relevant transmitter and transmitter
3. RadioLinkTest
RadioLinkTest
Master
EnOcean monitor
ID
001219F5
Lev:
-44dBm
Sub: 5
Qual: 100%
O
~
Quality
Transmitter (transmitter ID)
Lev: RSSI level
Sub: Sub-telegrams
,
PEHA_M_450FU_HS128 (Rev02-26.07.17)
Advertisement
Table of Contents
