Electrical Data; Battery; Dc Supply; Conditions Of Certification - Honeywell OneWireless XYR 6000 Quick Start Manual

Hide thumbs Also See for OneWireless XYR 6000:
Table of Contents

Advertisement

1. Introduction

Conditions of Certification

Electrical Data:

Battery

Two in series connected (D size) Lithium batteries, type 5930 manufactured by Tadiran, type XL-205F
manufactured by Zeno Energy or type PT-2300H manufactured by Eagle Picher.
Additionally for ATEX and IECEx certifications, Lithium Battery SL-2780, manufactured by Tadiran,
GmbH may be used.

DC Supply

For Ordinary Locations, Explosion-proof and Non Incendive:
16.0 V min to 28.0 V max, Current = 100 mA
For Intrinsically Safe:
A Barrier, MTL 728P+ or MTL 7728P+ mounted in a suitable enclosure, or in a non-hazardous
location is needed, see Agency Certification drawings in Section 6.
For Output parameters associated with Temperature/ Discrete Inputs, Corrosion, High Level INPUT
(HLAI) or Universal I/O, see Agency Certification drawings in Section 6.
1.4
Conditions of Certification

IECEx Conditions of Certification

Parts of the antenna are non-conducting and the area of the non-conducting part exceeds the maximum
permissible areas for Category ll 1 G (Zone 0) according to IEC 60079-0. Therefore when the antenna is
used within a potentially explosive atmosphere, appropriate measures must be taken to prevent
electrostatic discharge.
Impact and friction hazards need to be considered according to IEC 600079-0 when the transmitter that is
exposed to the exterior atmosphere is made of light metal alloys, and used in Category ll 1 G (Zone 0).

ATEX Conditions for Safe Use

Because the enclosure of the XYR 6000 Wireless Transmitter is made from aluminum, if it is mounted in
an area where the use of category 1G apparatus is required, it must be installed such that even in the event
of rare incidents, ignition sources due to impact and friction sparks are excluded.
Special precautions shall be taken to prevent the surface of the antenna of the XYR 6000 Wireless
Transmitter from being electrostatically charged.
1.5

Maximum Working Pressure:

See individual Product manuals as defined on
6
OneWireless XYR 6000 Transmitters Quick Start Guide
page iii
Revision 12
February 2013

Advertisement

Table of Contents
loading

Table of Contents