HUAWEI VP9660
Quick Start Guide
3.
4.
----End
4.1.4 Adding an MCU
This section describes how to add an MCU to the SMC2.0.
On the SMC2.0, the administrator can search for an MCU by its IP address to obtain the
configuration information of the MCU. After checking and modifying the configuration
information, the administrator can add the MCU to the SMC2.0. The modifications are
synchronized to the MCU. This enables the administrator to manage the MCU on the
SMC2.0.
Step 1 Log in to the SMC2.0 web interface.
Step 2 Choose Devices > MCU.
Step 3 Click Add MCU.
The MCU search page is displayed, as shown in
Issue 04 (2013-12-30)
Figure 4-8 Edit GK dialog box
Select GK prefix from Type, enter the prefix, and click Add.
The new prefix is displayed in the dialog box.
Click Save.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
4-9.
4 Using the SMC2.0
50