Logging In To The Web Interface - Huawei VP9660 Quick Start Manual

HUAWEI VP9660
Quick Start Guide
Indicator
ALM
RUN
GE/FE

3.2 Logging In to the Web Interface

The VP9660 provides web-based management. Using a computer with an Internet browser,
you can log in to the VP9660 web interface for configuration.
Default Settings
During your first login to the VP9660 web interface, use the default settings listed in
3-4.
Table 3-4 Default settings
Parameter
IP address of the ECCB board GE0 port
Issue 04 (2013-12-30)
Status
Off
Off
Steady red or quickly
blinking
Steady green
Off
Slowly blinking (about
0.5 Hz, once every 2
seconds)
Quickly blinking
(about 4 Hz, four times
per second)
Steady green
Green off
Blinking orange
Orange off
The media and ISDN boards do not provide the ACT indicator. The other indicators listed in
are the same as the indicators on these two types of boards.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
The board is not being used or it is the standby
board.
The board is operating correctly.
The board is malfunctioning.
The board is powered on but is
malfunctioning.
The board is not powered on or the board fails
to start.
The board is operating correctly according to
the configuration.
The board is loading programs.
The network port connection is normal.
No connection is established on the network
port or the connection fails.
Data is being received or sent through the
network port.
No data is being received or sent through the
network port.
Value
192.168.2.1
3 First Time Use
Table 3-3
Table
34