HUAWEI VP9660
Quick Start Guide
Figure 2-2 Removing the cover
Step 3 Remove the carton packed with cables from the wooden crate.
Step 4 Pull straight all the tongues on the side boards and remove these boards, as shown in
2-3.
Figure 2-3 Removing the side boards
Step 5 Remove foam boards.
Step 6 Carry the device to the installation site.
----End
Unpacking a Carton
Cartons are used to pack cables, boards, and terminal devices. It is recommended that one
person be in charge of each individual carton. Check the cartons one by one. Confirm that
cartons are empty before throwing them away. The following procedure uses a carton for
packing boards as an example.
Issue 04 (2013-12-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Installing the VP9660
Figure
8