Huawei VP9660 Quick Start Manual page 55

Hide thumbs Also See for VP9660:

Table of Contents

HUAWEI VP9660

Quick Start Guide

Figure 4-9 Search page

Step 4 Enter the MCU IP address in Device Address and click Next.

The MCU's configuration information is displayed, as shown in

Figure 4-10 MCU configuration information

Step 5 Under general settings, Set Name and Prefix. Under H.323 settings, specify H323 ID and

GK address.

Step 6 Click Add.

----End

Verifying the Result

If the MCU successfully interconnects with the SMC2.0, the following icons are displayed on

the MCU page:



Issue 04 (2013-12-30)

The default SNMP settings on the MCU are displayed on the page. If you have modified the default

SNMP settings on the MCU, a search for the MCU will fail. If the search fails, modify the displayed

SNMP settings based on your modifications on the MCU. For details, see the HUAWEI

VP9660&VP9650&VP9630 V200R001 Configuration Guide. You can contact Huawei technical support

engineers or visit

http://enterprise.huawei.com/support

: The MCU is registered with a GK.

: A service connection is set up between the SMC2.0 and MCU.

Huawei Proprietary and Confidential

4 Using the SMC2.0

Figure

4-10.

to obtain this document.

Table of Contents