Error Code Types - icetro SSI-303SN User Manual

Error code types

Error code
Er 1 hoPn Cooling temperature sensor is bad.(Open)
Er 2 Cooling temperature sensor is bad.(Short)
hSht
Er 3
CoPn
Cooling cylinder entrance's temperature
sensor is bad.(Open)
Er 4
Cooling cylinder entrance's temperature
CSht
sensor is bad .(Short)
Er 5 AoPn
Condenser suction temperature sensor is
bad. (Open)
But it operates when 4-11
(neighboring temperature selection) is on.
Condenser suction temperature
Er 6
ASht
sensor is bad. (Short) But it
operates when 4-11 (neighboring
temperature selection) is on.
EoCr
Over current of the dasher motor and
Er 7
current detection failure.
High voltage detected.
HiPS
Er 8
noLA
Er 9 Soft cream not formed.
Lovo
Er 10
Supply voltage exceeding -15%.
Hivo
Er 11
Supply voltage exceeding +15%.
Er 12 drAU
Bad location of the out lever.
Er 13 Hott
Condenser suction temperature too high.
Er 14 bELt Axial power is abnormal.
Er 15 EEP1 Main PCB EEPROM is abnormal.
Data communication failure.
dAtA
Er 16
Error details
occurrence
Error Release
condition
Stop Auto release Continuous display
Stop Auto release Continuous display
Stop Auto release Continuous display
Stop Auto release Continuous display
Start 5 minute interval
Auto release
Start Auto release 5 minute interval
Stop Reset Continuous display
Stop
Auto release Continuous display
Start
After a dormancy Continuous display
Stop
Auto release Continuous display
Stop
Auto release Continuous display
Start
Auto release
5 minute interval
Start Auto release
5 minute interval
Stop Reset
Continuous display
Start Reset
5 minute interval
Auto release
Stop Continuous display
Display
39