How To Upgrade The Program - icetro SSI-303SN User Manual

How to upgrade the program (Download kit
7. Press the right button on the download kit.
The red and green LED will blink and then the
green LED will blink alone when downloading
starts. When downloading iscompleted, the green
LED will stay on.
8. When the downloading is completed, remove the downloading
connector and turn on all the pins of the 2 pin dip switch.
9. Prepare a download kit with the latest version of
the program. Insert it into the download connector
(left to thedip switch) of the main PCB.
10. Using the same method as for downloading the
main PCN program, when the green LED of the
download kit is on, press the leftbutt on. Then
the green LED will blink onceto mean that it is
ready for downloading. Press the right button to
download.
11. When the downloading is completed, remove
thedownloading connector and turn on all the pins
ofthe 2 pin dip switch.
12. After updating the program, assemble the button
display panel and check if the version of the
program is correct in item 1 through 7.
32
Product)
KSD32H
1 3
Year Day Tim
Month
Year
Set
Select
Temperature
Level(%)
NO
R39
R42
-10K -10K
-1232
ON
1
2
NO NO
ON KSD32H ON KSD32H
oc1 1 3 oc1 2
NO
ON KSD32H
oc1 2
Month Day Time
Set
Select
Temperature Level(%)