How To Upgrade The Program -Download Kit Product 31~33 - icetro SSI-303SN User Manual

How to upgrade the program (Download kit
performing any work. In this case, do not power
off. Remove the fixing bolts from the left/right/
bottom/top of the product.
2. While pulling out the lever shaft, separate the sales lever.
At this time, please be careful not to drop thesales lever.
It can easily get damaged.
3. By taking out the button display panel on the bottom and
turning it upside down, you can place it on top of the product.
At this time, do not damage the PCB wire and connectors.
4. Turn off both dip switches pin no.
2 of the display PCB on the button
display panel and pin no. 2 of the main
PCB inside.
5. Prepare a download kit with the latest
version of program. Insert itinto the
download connector (left ofthe dip switch)
for the main PCB.
6. When the green LED of the download kit
is on, press the left button. Then the green
LED will blink once tomean that it is ready for
downloading.
Product)
NO
R39
R42
-10K -10K
-1232
KSD32H
ON
1
1
2
NO
ON KSD32H
3 oc1 2
31