Icetro' Air Pump A; Disassembling The Pump - icetro SSI-303SN User Manual

ICETRO' AIR PUMP A

ICETRO pump allows, by changing position of regulator position.
A , to vary proportions between air and mix conveyed to the
freezing cylinder ; so, within certain limits, it allows overrun
regulation depending on mix used.
ICETRO pump regulator should be set to the middle position.
If, after dispensing a significant number of cones, ice cream is
too heavy and wet, you may move ICETRO pump
regulator a notch at a time towards the right. If ice cream comes
out of spigot mixed with air bubbles, then turn pump regulator a
notch at a time towards the left.
Pump Cleaning

Disassembling the pump

- Disconnect the connection pipe by freeing it from the pin found on the pump cover.
- Pull the connection pipe backwards and remove the feeding pipe(
- Removing the pump by turning it clockwise of 45
- Disassemble the pump
) then pulling upwards.
then pull backwards.
27