Modem Connection; Configuring The Modems; Configuring The Modem Attached To The Pc - Nortel Passport 4460 Hardware Reference Manual

98 Chapter 7 Port Connections for the Passport 4460
Connect one end of the cable to the PC and the other end to the Passport 4460
management port. You may need a 9-pin-to-25-pin RS-232/V.24 serial port
adapter or a female-to-female 25-pin adapter to connect the cable to the PC. This
adapter is not provided with the unit.

Modem Connection

If the PC and the Passport 4460 unit are not in physical proximity to one another,
you can connect them through a modem, as shown in this diagram:

Configuring the Modems

If you are using a modem connection between your workstation and a
Passport 4400, the modems at each end of the connection must be configured
correctly to support communications with a Passport 4400.

Configuring the Modem Attached to the PC

When you configure the modem that is attached to your PC, be sure to choose the
correct driver for the device. Once the modem is installed, configure the modem
properties with the phone number of the modem that is attached to the
Passport 4460.
205677-F Rev 00
PC
Serial Port
Modem
Management Port Connector
115/230V
Serial Cable
Modem
RESERVED
MGNT
SERVICE
PORT
PORT