ATTENTION
For surface disinfection use a product recommended by the manufacturer.
The machine has a safety thermostat which interrupts the power supply to the
heater elements in the event of overheating.
Always locate a fault before switching the machine on again.
CLEANING THE MACHINE CASING
Person: USER
Procedure
Use a damp cloth to clean the outer body of the machine.
Use only pH-neutral detergents.
Do not use abrasive detergents or solvents and/or thinners of any kind.
Cleaning the control panel
Clean the control panel with a damp cloth and detergent. Do not use abrasive detergents or
solvents and/or thinners of any kind.
DISINFECTION TREATMENT
Person: USER
Procedure
Run the STANDARD programme with an empty load carrier.
REV.0.00_COD.223130_A4
Frequency: daily
Frequency: weekly
MAINTENANCE
Page 43