MENU
10.6 Selecting language
Control panel with LCD display:
Control panel with LED indicator
10.7 I/O status
Serial interface (RS232)
The RS232 port is intended for the connection of peripherals such as PCs or printers.
REV.0.00_COD.223130_A4
Hold PRG pressed for 5 seconds.
Use PRG to scroll through the menu until the following option
appears in the display:
o
"LANGUAGE"
Press START .
Press SHORT and STANDARD to select a language and
press START to confirm and save.
Press STOP to quit without saving.
Hold PRG pressed for 5 seconds.
Use PRG to scroll through the menu until the
following option appears in the display:
Press START .
Press SHORT and STANDARD to select a
language and press START to confirm and save.
Press STOP to quit without saving.
Display
P a r
L A n
Page 36