When the machine is switched on, the internal tank is automatically filled with water. The machine
is ready for use once a certain water level is reached.
Ready for operation
The machine is ready for operation.
The diagnostics are active.
If necessary the display indicates that the door is open or gives warning messages:
Lack of detergent, lack of descaling agent, memory full (historical data) or high temperature inside
In the event that an error is detected, the cycle is interrupted and the door remains locked.
The error message appears in the display.
The door remains locked.
To open the door, the door release sequence must be performed at the controls:
Press START and STOP simultaneously for 3 seconds.
Select STANDARD and SHORT one after the other.
After the door opening sequence, the machine is READY FOR OPERATION and the door
can be opened.
If the error persists or the door remains closed, contact Service or a suitably qualified person.
Interruption to the power supply during operation
If a temporary interruption to the power supply occurs during a programme, no particular action is
The programme will continue after the interruption.