Standard Configuration D; Applications - ABB RELION 615 Series Applications Manual

Section 3
RED615 standard configurations
3.3
3.3.1
34

Standard configuration D

Applications

The standard configuration with directional overcurrent and directional ground-fault
protection, phase-voltage and frequency based protection is mainly intended for cable
feeder applications in distribution networks. The standard configuration for line current
differential protection includes support for in-zone transformers. The configuration also
includes additional options to select ground-fault protection based on admittance,
wattmetric or harmonic principle.
Standard configuration D is not designed for using all the available functionality content
in one relay at the same time. Frequency protection functions and third instances of
voltage protection functions must be added with the Application Configuration tool. To
ensure the performance of the relay, the user-specific configuration load is verified with
the Application Configuration tool in PCM600.
The protection relay with a standard configuration is delivered from the factory with
default settings and parameters. The end user flexibility for incoming, outgoing and
internal signal designation within the protection relay enables this configuration to be
further adapted to different primary circuit layouts and the related functionality needs by
modifying the internal functionality using PCM600.
1MAC807603-MB A
RED615 ANSI
Application Manual