Section 5
Protection relay's physical connections
5.1.4
5.2
5.2.1
102
Table 30:
Binary input terminals X130:1-8 with AIM0006 module
Terminal
X130:1
X130:2
X130:3
X130:4
X130:5
X130:6
X130:7
X130:8
RTD/mA inputs
It is possible to connect mA and RTD based measurement sensors to the protection relay,
if the protection relay is provided with optional with AIM0003 module in standard
configuration D.
Table 31:
Optional RTD/mA inputs with AIM0003 module
Terminal
X130:1
X130:2
X130:3
X130:4
X130:5
X130:6
X130:7
X130:8
Outputs
Outputs for tripping and controlling
Output contacts PO1, PO2, PO3 and PO4 are heavy-duty trip contacts capable of
controlling most circuit breakers. In the factory default configuration, the trip signals from
all the protection stages are routed to PO3 and PO4.
Description
BI1, +
BI1, -
BI2, +
BI2, -
BI3, +
BI3, -
BI4, +
BI4, -
Description
mA 1 (AI1), +
mA 1 (AI1), -
RTD1 (AI2), +
RTD1 (AI2), -
RTD1 (AI2), ground
RTD2 (AI3), +
RTD2 (AI3), -
RTD2 (AI3), ground
1MAC807603-MB A
RED615 ANSI
Application Manual