Document Conventions; Functions, Codes And Symbols - ABB RELION 615 Series Applications Manual
Line differential protection and control
Hide thumbs
Also See for RELION 615 Series:
- Technical manual (1196 pages) ,
- Applications manual (220 pages) ,
- Operation manual (164 pages)
Table of Contents
Advertisement
Section 1
Introduction
1.4.2
1.4.3
8
Although warning hazards are related to personal injury, it is necessary to understand that
under certain operational conditions, operation of damaged equipment may result in
degraded process performance leading to personal injury or death. Therefore, comply
fully with all warning and caution notices.
Document conventions
A particular convention may not be used in this manual.
•
Abbreviations and acronyms are spelled out in the glossary. The glossary also
contains definitions of important terms.
•
Push button navigation in the LHMI menu structure is presented by using the push
button icons.
To navigate between the options, use
•
Menu paths are presented in bold.
Select Main menu/Settings.
•
LHMI messages are shown in Courier font.
To save the changes in nonvolatile memory, select Yes and press
•
Parameter names are shown in italics.
The function can be enabled and disabled with the Operation setting.
•
Parameter values are indicated with quotation marks.
The corresponding parameter values are "Enabled" and "Disabled".
•
Input/output messages and monitored data names are shown in Courier font.
When the function picks up, the PICKUP output is set to TRUE.
•
Dimensions are provided both in inches and mm. If it is not specifically mentioned,
the dimension is in mm.
•
This document assumes that the parameter setting visibility is "Advanced".
Functions, codes and symbols
Table 1:
Functions included in the relay
Function
Protection
Three-phase non-directional overcurrent
protection, instantaneous stage
Three-phase directional overcurrent
protection, low stage
Three-phase directional overcurrent
protection, high stage
Non-directional ground-fault protection, high
stage
Table continues on next page
and
.
IEC 61850
IEC 60617
PHIPTOC1
3I>>> (1)
DPHLPDOC1
3I> -> (1)
DPHLPDOC2
3I> -> (2)
DPHHPDOC1
3I>> -> (1)
EFHPTOC1
Io>> (1)
1MAC807603-MB A
.
ANSI/C37.2-2008
50P-3
67/51P-1
67/51P-2
67/50P-1
50G-1
RED615 ANSI
Application Manual
Advertisement
Table of Contents
