Table of Contents
Advertisement
5. Move the release lever to the back.
6. Mount the paper guide in the upright position.
Now you can load single sheets either automatically or manually, as
explained previously. The fanfold paper remains parked at the back of the
printer.
NOTE:You
cannot park the fanfold paper if you have loaded it from the
bottom of the printer.
Paper unparking
When you want to resume using fanfold paper, the procedure is as follows.
1. Remove all single sheets from the printer.
2. Mount the paper guide in the horizontal position.
3. Move the release lever to the front.
4. Press the C TFAF
> button. The printer will automatically feed the
parked fanfold paper back into position for printing.
NOTE:
The printer beeps intermittently if you move the release lever while
the paper is loaded.
17
Advertisement
Table of Contents
