Star Micronics NX-1020 User Manual page 76

Print quadruple-density 8-bit graphics
Mode ASCII
Decimal Hexadecimal
Both
cESC> '7" nl n2 27 90 nl n2
1B 5A
nl n2
ml m2 . . . ml m2 . . . ml m2 . . .
Prints bit-image graphics at 240 dots per inch horizontally (maxi-
mum 1920 dots wide), skipping every second dot in the horizontal
direction. See <ES0 "K" for other information.
Select graphics mode
Mode ASCII Decimal Hexadecimal
Std.
cESC> "*" n0 nl 27 42 n0 nl
1B 2A n0
nl
n2 ml m2 . . . n2 ml m2 . . . n2 ml m2 . . .
Selects one of eight graphics modes depending on the value of
n0
and prints bit-image graphics in this mode. See <ESC> "K" for
information on
nl, n2, ml, m2, . . .
n0
Graphics mode
0 Normal-density (60 dots per inch)
1 Double-density
(120 dots per inch)
2 Double-density, double-speed (120 dots per inch)
3 Quadruple-density (240 dots per inch)
4 CRT graphics, mode I (80 dots per inch)
5 Plotter graphics (72 dots per inch)
6 CRT graphics, mode II (90 dots per inch)
7 Double-density plotter graphics (144 dots per inch)
Convert graphics density
Mode ASCII Decimal Hexadecimal
Std.
cESC> "?,, n m 27 63 n m
1B 3F
n m
Converts graphics defined by subsequent cESC> "K", cESC> "L",
<ES0 "Y" or <ES0 "Z" commands to a density mode defined by
<ES0 "*".
n
is "K", "L", "Y" or "z", indicating the mode to be
converted.
m
is a code from <O> to c7> indicating one of the modes
of <ES0 "*".
68
-
-
._
-