Star Micronics NX-1020 User Manual page 65

Execute <ES& 'A"
Mode
ASCII Decimal Hexadecimal
IBM <ESC> "2"
27 50 1B 32
Sets the line spacing to the value defined by the last preceding
<ESC> "A" command. Sets the line spacing to l/6 inch if there is
no preceding <ES0 "A" command.
Line feed
Mode ASCII
Decimal Hexadecimal
Both <LF> 10
OA
Prints the current line and feeds the paper to the next line. See the
preceding commands for the line spacing.
Reverse line feed
Mode ASCII Decimal
Hexadecimal
Std.
cESC> <LF>
27 10 1B OA
IBM <ESC> "1"
27 93 1B 5D
Prints the current line and feeds the paper in the reverse direction to
the preceding line. See the preceding commands for the line
spacing. Ignored when friction feed is used.
Perform one n/216-inch line feed
Mode ASCII Decimal
Hexadecimal
Both <ESC> "J-' n
27 74
n
1B 4A
n
Feeds the paper once by n/2 16 inches, where n is between 1 and 255.
Does not move the print position right or left in the standard mode.
Does not change the line-spacing setting.
57